Having said that, being that the spec calls for EXT2/3, when sending DCP's out to unknown destinations on physical media, I always run it through linux to properly format it and lock down the read/write access on the drive. It seems that if it's running linux it will at least know how to read NTFS (even if it can't write it) and if it's a windows box it will natively support NTFS. Ive had smoothing sailing for years with DCP by having a dedicated mini Linux box (I run Unbuntu 12.04 since it plays nice with remote. I'm yet to see a server not work with NTFS drives. For clients who only want an online delivery but then decide they want to create a physical copy on their end, I get them to try formatting a drive as NTFS since running them through how to format a drive correctly in Linux in EXT2/3 would be close to impossible. Admittedly, these were for trailers on a USB drive though, so perhaps the importance of immediate compatibility wasn't as high.Īs an aside, for cinemas I regularly deliver to, I often just format the drives as NTFS because I know it works there and I'm already doing the mastering in Windows anyway. If you have a single drive in the computer and you just connected a USB drive to it, there’s a good chance the exFAT file system will be /dev/sdb1 instead. All was fine, my external HDD and all my internal partitions were able to mount. It offers transparent encryption, uses checksums on the metadata (journal and other), supports TRIM, and implements delayed allocation. So I downloaded and installed ExtFS for Windows (Paragon) and set it to autostart. Ext4 is a standard root/tree file system, with a boot sector, partition table, and like the Unix File System, uses inodes (index nodes) to describe files and objects. Yesterday I boot in Windows and I needed to connect my external HDD, which uses ext file system. This is the first partition (1) on the third device (c). I have installed two OS on my laptop: ArchLinux and Windows 10. It has metadata structure inspired by traditional Unix filesystem principles, and was designed by Rémy Card to overcome certain limitations of the MINIX file system. In the example below, the device is located at /dev/sdc1. The extended file system, or ext, was implemented in April 1992 as the first file system created specifically for the Linux kernel. Which command will help to diagnose Linux server not booting due to one of. I've seen plenty of EXT3 drives come from Deluxe and Technicolor. Next, run the following command to mount the device. You need to create an ext4 file system on the first partition on the second. I might change over to EXT2 just for one extra layer of safety.Īlso, I don't think it's true that all studio DCPs are delivered as EXT2. I'm yet to run into an issue with EXT3 but this is good to know.
0 Comments
Leave a Reply. |